Sunday 12 February 2012

Media Sterlization



Media Sterlization:

Media can be treated by variety of methods like radiations, filtration, ultrasonic treatment and heat. Practically the universal and most favourable method for sterilization is the steam.

Kinetics of Sterlization:
The destruction of microorganisms by steam or the moist heat can be described by the first order chemical reaction and can be represented by the following equation:
-                                                                                                 dN / dt = kN                               Eq no. 1

N is no. Of viable organisms present
t is the time of sterilization treatment.
k  is the reaction rate constant or the specific death rate


Upon integration of equation no.1 we get:
                                          Nt / N0 = e –kt                           Eq no. 2

N0 is no. of viable organisms present at the start of sterilization
Nis the no. Of viable organisms after treatment period t

Upon taking natural logarithms of the Eq. No. 2 we get:
                                           ln (Nt / N0)  =  -kt                    Eq no.3
 


                  
                                   
 

 A plot of natural logarithm of  Nt / N0 against time will yield a straight line ; the slope of which is equal to – k (see the fig. ABOVE)
So we can make 2 anomalous predictions from the plot:


1.  An infinite time is required to achieve sterile conditions. ( Nt  = zero)

2.   After a certain period of time there will less than one viable cell present.
But the above plots can be observed only when the sterilization of pure culture is done in one physiological form only and that too under the ideal sterilization conditions. Thus, the value of k is not only species dependent but also on the physiological form of the cell e.g. endospores of genus Bacillus will be more heat resistant than the vegetative cells.
Considering this factor Richards in 1968 has produced a series of graphs (see Graphs below) which illustrate the deviation from the theory which can be expressed in the practice.




              





      GRAPH 1








  GRAPH 2


Above 3 graphs illustrate the effect of time of heat treatment on the survival of a population of bacterial endospores.
Graph 1 shows the initial population increase resulting from heat activation of spores in early stages of sterilization; followed by the decline in viable spore number. Activation o spores is significantly more than their destruction during early stages of the process and therefore viable number of spores increases before the observation of exponential decline.
Graph2 illustrates the initial stationary period followed by the decline; owing to the fact that the death of the spores is compensated by the heat activation of spores.
Graph 3 shows the population decline at a sub maximum rate due to the death of the spores.

 GRAPH 3


Now we know that with any first order reaction, the reaction rate increases with temperature increase due to increase in the reaction rate constant which is the case of destruction of microorganisms (i.e.specific death rate constant; k).
Thus, the relationship between the temperature and reaction rate constant can be expressed by Arrhenius Equation:

                                                     dlnk/dT  = E/RT2                                                  Eq no 4:

E is the Activation energy
R is gas constant
T is absolute temperature

Upon integration of Eq. no 4 we get:

                                                   k= Ae- E/RT                                                            Eq. no 5:

A is Arrhenius constant
On taking natural Logarithms Eq no. 5 becomes:

                                                     ln k = ln A  - E/Rt                               Eq. No.6:

By combining Eq. no. 3 and 5 following expression can be derived for heat sterilization of a pure culture at a constant temperature:
                                               ln (Nt / N0)  = A.t.e –E/Rt                       Eq. no. 7

Deindoerfer and Humphery used the term  ln (Nt / N0)  as a design criterion for the sterilization which has been called as DEL Factor or NABLA factor.


Del factor is a measure of fractional reduction of viable organism count produced by a certain heat and time regime. Therefore:



                                                    =    ln (Nt / N0)
           But;         ln (Nt / N0) = kt
                  &                kt = A.t. e –E/Rt           
               Thus,           = A.t. e –E/Rt                                    Eq. no. 8

On rearranging equation no. 8 becomes :

                        ln t = E/RT +  ln  (  /A)                 eq. no 9

Thus, a plot of the natural logarithm of the time required to achieve a certain value against the reciprocal of the absolute temperature will yield a straight line, the slope of which is dependent on the activation energy.( see fig below)

     

So a regime of time and temperature can be determined if we want to achieve the desired Del factor. However , as we know fermentation medium is not an inert mixture of components so it is very likely that deleterious reactions occur , resulting in loss of nutrient quality. Two types of reactions occur during sterilization as follows:
(i) Interactions between nutrient components of the medium. A common occurrence during sterilization is the Maillard-type browning reaction which results in discoloration of the medium as well as loss of nutrient quality. These reactions are normally caused by the reaction of carbonyl groups, usually from reducing sugars, with the amino groups of amino acids and proteins. Problems of this type are normally resolved by sterilizing the sugar separately from the rest of the medium and recombining the two after cooling.
(ii) Degradation of heat labile components. Certain vitamins, amino acids and proteins may be degraded during a steam sterilization regime. In extreme cases, such as the preparation of media for animal-cell culture, filtration may be used.


P.S I do not owe any of the above text.

References:
 Shuler, M.L. and Kargi, F. (2002) Bioprocess Engineering: Basic Concepts. 2 nd Edition. Prentice Hall, 
Stanbury, P. , Whittaker, A. (2004) Principles of Fermentation Technology


Monday 6 February 2012

Facts About DNA


Facts About DNA
  1. DNA stands for deoxyribonucleic acid.
  2. DNA is part of our definition of a living organism.
  3. DNA is found in all living things.
  4. DNA was first isolated in 1869 by Friedrich Miescher.
  5. James Watson and Francis Crick figured out the structure of DNA.
  6. DNA is a double helix.
  7. The structure of DNA can be likened to a twisted ladder.
  8. The rungs of the ladder are made up of “bases”
  9. Adenine (A) is a base.
  10. Thymine (T) is a base.
  11. Cytosine (C) is a base
  12. Guanine (G) is a base.
  13. A always pairs with T in DNA.
  14. C also pairs with G in DNA.
  15. The amount of A is equal to the amoun tof T, same for C and G.
  16. A+C = T+G
  17. Hydrogen bonds hold the bases together.
  18. The sides of the DNA ladder is made of sugars and phosphate atoms.
  19. Bases attached to a sugar; this complex is called a nucleoside.
  20. Sugar + phosphate + base = nucleotide.
  21. The DNA ladder usually twists to the right.
  22. There are many conformations of DNA: A-DNA, B-DNA, and Z-DNA are the only ones found in nature.
  23. Almost all the cells in our body have DNA with the exception of red blood cells.
  24. DNA is the “blueprint” of life.
  25. Chromosomal or nuclear DNA is DNA found in the nucleus of cells.
  26. Humans have 46 chromosomes.
  27. Autosomal DNA is part of chromosomal DNA but does not include the two sex chromsomes – X and Y.
  28. One chromosome can have as little as 50 million base pairs or as much as 250 million base pairs.
  29. Mitochondrial DNA (mtDNA) is found in the mitochondria.
  30. mtDNA is only passed from the mother to the child because only eggs have mitochondria, not sperm.
  31. There’s a copy of our entire DNA sequence in every cell of our body with one exception.
  32. Our entire DNA sequence is called a genome.
  33. There’s an estimated 3 billion DNA bases in our genome.
  34. One million bases (called a megabase and abbreviated Mb) of DNA sequence data is roughly equivalent to 1 megabyte of computer data storage space.
  35. Our entire DNA sequence would fill 200 1,000-page New York City telephone directories.
  36. A complete 3 billion base genome would take 3 gigabytes of storage space.
  37. If unwound and tied together, the strands of DNA in one cell would stretch almost six feet but would be only 50 trillionths of an inch wide.
  38. In humans, the DNA molecule in a non-sex cell would have a total length of 1.7 metres.
  39. If you unwrap all the DNA you have in all your cells, you could reach the moon 6000 times!
  40. Our sex cells–eggs and sperm–have only half of our total DNA.
  41. Over 99% of our DNA sequence is the same as other humans’.
  42. DNA can self-replicate using cellular machinery made of proteins.
  43. Genes are made of DNA.
  44. Genes are pieces of DNA passed from parent to offspring that contain hereditary information.
  45. The average gene is 10,000 to 15,000 bases long.
  46. The segment of DNA designated a gene is made up of exons and introns.
  47. Exons have the code for making proteins.
  48. Introns are intervening sequences sometimes called “junk DNA.”
  49. Junk DNA’s function or lack thereof is a source of debate.
  50. Part of “junk DNA” help to regulate the genomic activity.
  51. There are an estimated 20,000 to 25,000 genes in our genome.
  52. In 2000, a rough draft of the human genome (complete DNA sequence) was completed.
  53. In 2003, the final draft of the human genome was completed.
  54. The human genome sequence generated by the private genomics company Celera was based on DNA samples collected from five donors who identified themselves only by race and sex.
  55. If all the DNA in your body was put end to end, it would reach to the sun and back over 600 times (100 trillion times six feet divided by 92 million miles).
  56. It would take a person typing 60 words per minute, eight hours a day, around 50 years to type the human genome.
  57. If all three billion letters in the human genome were stacked one millimeter apart, they would reach a height 7,000 times the height of the Empire State Building.
  58. DNA is translated via cellular mechanisms into proteins.
  59. DNA in sets of 3 bases, called a codon, code for amino acids, the building blocks of protein.
  60. Changes in the DNA sequence are called mutations.
  61. Many thing can cause mutations, including UV irradiation from the sun, chemicals like drugs, etc.
  62. Mutations can be changes in just one DNA base.
  63. Mutations can involve more than one DNA base.
  64. Mutations can involve entire segments of chromosomes.
  65. Single nucleotide polymorpshisms (SNPs) are single base changes in DNA.
  66. Short tandem repeats (STRs) are short sequences of DNA repeated consecutively.
  67. Some parts of the DNA sequence do not make proteins.
  68. Genes make up only about 2-3% of our genome.
  69. DNA is affected by the environment; environmental factors can turn genes on and off.
  70. There are many ways you can analyze your DNA using commercially available tests.
  71. Paternity tests compare segments of DNA between the potential father and child.
  72. There are other types of relationship testing that compares DNA between siblings, grandparents and grandchild, etc.
  73. DNA tests can help you understand your risk of disease.
  74. A DNA mutation or variation may be associated with a higher risk of a number of diseases, including breast cancer.
  75. DNA tests can help you understand your family history aka genetic genealogy.
  76. DNA tests can help you understand your ethnic make-up.
  77. DNA can be extracted from many different types of samples: blood, cheek cells, urine.
  78. DNA can be stored either as cells on a cotton swab, buccal brush, or frozen blood or in extracted form.
  79. In forensics, DNA analysis usually looks at 13 specific DNA markers (segments of DNA).
  80. The odds that two individuals will have the same 13-loci DNA profile is about one in one billion.
  81. A DNA fingerprint is a set of DNA markers that is unique for each individual except identical twins.
  82. Identical twins share 100% of their genes.
  83. Siblings share 50% of their genes.
  84. A parent and child share 50% of their genes.
  85. You can extract DNA at home from fruit and even your own cheek cells.
  86. DNA is used to determine the pedigree for livestock or pets.
  87. DNA is used in wildlife forensics to identify endangered species and people who hunt them (poachers).
  88. DNA is used in identify victims of accidents or crime.
  89. DNA is used to exonerate innocent people who’ve been wrongly convicted.
  90. Many countries, including the US and UK, maintain a DNA database of convicted criminals.
  91. The CODIS databank (COmbined DNA Index System) is maintained by the BI and has DNA profiles of convicted criminals.
  92. Polymerase chain reaction (PCR) is used to amplify a sample of DNA so that there are more copies to analyze.
  93. We eat DNA every day.
  94. DNA testing is used to authenticate food like caviar and fine wine.
  95. DNA is used to determine the purity of crops.
  96. Genetically modified crops have DNA from another organism inserted to give the crops properties like pest resistance.
  97. Dolly the cloned sheep had the same nuclear DNA as its donor mom but its mitochondrial DNA came from from the egg mom. (Does that make any sense?)
  98. People like to talk about DNA even if it bears no relation to science or reality.
  99. A group of bloggers who write regularly about DNA and genetics have banded to gether to form The DNA Network.
  100. Lists about DNA can get a little boring.
INTERESTING????
GET MORE INFO HERE  EYEONDNA.COM

Saturday 4 February 2012

AMAZING PHENOMENON OF SAND CASCADES ON MARS

Dark Sand Cascades on Mars

They might look like trees on Mars, but they're not. Groups of dark brown streaks have been photographed by the Mars Reconnaissance Orbiter on melting pinkish sand dunes covered with light frost. This image was taken in 2008 April near the North Pole of Mars. At that time, dark sand on the interior of Martian sand dunes became more and more visible as the spring Sun melted the lighter carbon dioxide ice. When occurring near the top of a dune, dark sand may cascade down the dune leaving dark surface streaks -- streaks that might appear at first to be trees standing in front of the lighter regions, but cast no shadows. Objects about 25 centimeters across are resolved on this image spanning about one kilometer. Close ups of some parts of this image show billowing plumes indicating that the sand slides were occurring even when the image was being taken.

Image Credit: HiRISE, MRO, LPL (U. Arizona), NASA